JUBU stainless steel valved silencer
The JUBU Stainless steel silencer was developed with highest sandards. It's lighter and - due to its special design and production technique offers a better flow than the OEM-muffler. With the very robust exhaust valve (stable for up to 500 hp at trackday usage) you can choose between a bautiful, roaring sound (open valve) and a moderate noise level (closed valve).
Usage and Benefits
-
Roaring, sporty sound (with open valve: 98-101db)
-
Moderate noise level - even usable at tracks with strict db-limits (with closed valve: 91-94 db)
- High power output - even with closed valve (only approx 5hp reduced power output with closed valve)
- Lightweight design (OEM standard muffler: 15,90 kg, JUBU stainless steel muffler: 13,56 kg)
- Suitable and stable (flap) for outputs of up to 500 hp. Please note that our motorsport silencer is recommended for long-term trackday use. The exhaust flap is available as a spare part and will have to be replaced approximately once a season if used permanently in "quiet" operation.
- Optimized design and production technique for an optimal flow
- Optimized and well tested design, optimized on dyno and race track
- Optimal diameters and lengths of tubes (70mm diameter - even on the entry side)
- Precisely and formed welded (also round weld without burrs at the inside of the pipes for an optimized flow)
- The components of the JUBU silencer are (in difference to products of many other manufacturers) not plugged into each other (which is heavier and has a negative effect on the flow), but flat/blunt welded (which is optimal for an efficient flow and reduces weight)
- High-Quality materials (steel from Böhler- or VÖEST)
- Handbuilt in Austria
- Carbon end-tips, on purpose with Lotus- or JUBU-Branding
Fits for
- All Exige S3 models (V6)
- All Evora models
- 3-Eleven
Scope of delivery
- Stainless steel sport silencer (valved) with Carbon end-tips
Options (please choose)
- Trackday noise kit (tailpipe 360° rotatable mit V-band clamp - reduced noise by redirecting of exhaust gases
- Control unit for valved exhaust (necessary, if there is no factory control unit in your model - depends on your car)
NOTE: You can install the JUBU stainless steel silencer with the OEM catalytic converter as well as with the optimized JUBU HJS sports catalytic converter. We can build the silencer - depending on your preferences - with flanges or for V-band clamps (please let us know). We highly recommend the usage of the JUBU HJS HD Sports catalytic converter.
If you have any questions about the product or to order, please do not hesitate to contact us by phone (+43 7264 20175) or email.
