inquirylist

Keep control with the JUBU spec Bosch motorsport M5 ABS system!

With the ABS M5 kit, Bosch Motorsport adapted an ABS system specifically for use in motorsport that offers engineers a high level of flexibility during the car setup. The revised ABS control algorithm and completely new hardware ensure improved wheel slip control and enhance brake performance. In cooperation with Bosch motorsport we adapted the system for the Lotus Exige V6 to bring a maximum of track-performance in your car.

From app. 1,3g of negative acceleration on the standard Lotus ABS reaches its limits. The control process in the standard unit is too slow for sporty track usage - consequence: you loose performance on track.

The JUBU spec Bosch M5 clubsport system resolves this problem. You can select predefined programs, especially adapted for the Exige with a 12-step control switch. With sport tyres you can reach 1,6g, with slicks app. 1,85g of negative accelleration (calibrated system). We've delveloped, testet and measured the system on track (some "fairy tales" say that there are negative accellerations of more than 2g possible with an Exige - a current spec GT3-race car with slicks does a maximum of 2,2g).

• optimized braking and shorter braking distances, especially customized for the Exige V6

• state of the art - most recent technology. The system calculates optimized braking, based on the data of 4 wheel-speed sensors, steering angle and yaw rate. This system is also used by all GT3 factory/top teams.

• 12-step selection of programs/setups is possible at any time (even while driving)

• calculation of brake ratio and display of optimization possibilities

• adjustable sensitivity and charactaristics to push the car to its real limits step by step

• 12-step controller to set up predefined modes

• free diagnostics software and programming tool to map individual setups

Details

• the system is adapted/specified especially for the usage in a Lotus Exige V6 (wiring harness, software, mappings) by JUBU
• up-to-date ABS hardware offers an improved tyre-slip-control

Fits for

• all Exige V6 models
• all Evora V6 models (spring 2021)

• as shown on pictures
• wiring harness incl. 12-step controller and on/off switch
• hydraulics unit (plug & play - fits on the standard mount)
• pressure and accelleration sensors (the sysem uses the original wheel speed sensors)

• Installation in your car at our workshop (almost plug & play system - only the wiring harness has to be installed). The installation can be done in our workshop within one day.

NOTE: motorsport part - the system is not intended to be used on public roads!

If you have any questions about the product or how to order, please do not hesitate to contact us by phone (+43 7264 20175) or email.